Inert gas fire suppression systems are the safe, natural way to extinguish a fire. Because of its unique patented valve assembly, Fike’s PROINERT® agent enters the protected room within the industry required 60 seconds but at a steady flow rate — preventing destructive turbulence from occurring. This constant flow rate allows for the use of small-diameter, low pressure (and less expensive) piping from the inert gas container all the way to the nozzle. And, the necessary venting area is much smaller — reducing installation costs by as much as 60% on venting hardware.
Comprehensive Inert Gas Fire Suppression Options
To safely protect applications with inert gas fire suppression solutions, PROINERT2 is available in the following configurations:
IG-55 Fire Suppression System: 5N2 5Ar
IG-541 Fire Suppression System: 5N2 4Ar 1CO2
IG-100 Fire Suppression System: 1N2 100 percent
IG-01 Fire Suppression System: 1Ar 100 percent
300 Bar Now Available — Save Money and Valuable Space
U.S. PROINERT systems, previously available in 150 and 200 bar cylinders, are now available with PROINERT2‘s 300 bar gaseous fire protection technology. That means more inert gas in each PROINERT2 cylinder, reducing the number of cylinders and accessory equipment necessary. In addition to a sizable reduction in system cost, fewer cylinders translates into an inert gas fire protection solution that takes less valuable space.
PROINERT2 Inert Gas Fire Suppression 200 BAR vs. 300 BAR
Smaller system footprint
High cylinder pressure
Same low manifold and piping pressure as 200 bar
No change in constant rate discharge
No change in room pressure venting requirements
Improved Actuation: The Universal Valve Operator (UVO) provides for a simplified, more efficient system that requires less pneumatic actuators, hoses and fittings. Fewer parts means a more reliable system at a fraction of the cost. Larger systems can also be expanded easily and less expensively with Fike’s new pneumatic relay.
Unlimited Elevated Pipe Runs: With PROINERT2, piping runs are unlimited. Locate your PROINERT2 system in the basement, the top floor or anyplace in between for effective protection and use of out-of-the-way storage spaces.
Expanded Nozzle Options = Improved Coverage: PROINERT2 now offers new nozzles and expanded sizes for increased engineering design options. Fike’s standard 360° nozzle is now available in multiple sizes and PROINERT2 offers a 180° nozzle for placement closer to walls and other obstacles. More choices mean greater design flexibility and area coverage.
PROINERT2 by Fike — Inert Gas Discharge Pressure Demonstration
The PROINERT2 fire suppression system is 100% natural, chemical-free and has ZERO global warming potential. This environmentally safe fire suppression system includes a unique patented valve assembly which results in a safer discharge and reduces installation cost by as much as 60%.
PROINERT®2 Inert Gas System
Inert gas systems are the safe, natural way to extinguish a fire. Fike’s PROINERT2 offers all the benefits of other inert gas systems, but with design improvements that make PROINERT2 a safer and more economical solution. PROINERT2 is a more natural and environmentally friendly agent. It is ideal for challenging spaces, requires fewer tanks than other inert systems, and offers greater design flexibility and lower system installation costs. Now with the new 300 bar technology, PROINERT2 also offers improved valve actuation which provides for a simplified, more efficient system with greater reliability.
The Environmentally Friendly Gaseous Fire Extinguishant
Uses a blend of environmentally inert, all natural argon and nitrogen gases.
Zero Ozone Depletion for maximum environmentalism
Superior design allows for convenient long pipe runs
Constant flow rate reduces hazardous pressure peaks
Typically requires less floor space than other inert gas systems
USGBC LEED® Recognized
Globally Approved and Recognized
included in ISO 14520
included in EN14520
included in NFPA 2001
US EPA SNAP Listed
Our Clean Agent Fire Protection Systems are USGBC LEED® recognized.
Want to expedite your request? We’re just a phone call away. +44 (0) 1622 677 081 for Explosion Protection and Pressure Relief +44 (0) 1633 865 558 for Fire Protection +44 (0) 7753 275 900 for Pressure Activation
Stay Engaged with Safety
Receive the latest industry and Fike solutions news by signing up for our quarterly newsletter.