Precise Vision Graphics
In this course, you will learn how to configure the Precise Vision Fire Detection Graphic System to provide detailed, visual fire detection information on exactly what is happening in your facility so the safest, most efficient action can be taken.
Course Overview
IMPORTANT: You must complete the CyberCat Certification course prior to enrolling in this course.
This course will guide you through how to configure Precise Graphics. Throughout this course, you will complete quiz questions to measure your understanding of the learning objectives below.
Learning Objectives
In the course, designers and programmers will learn how to:
- License Precise Vision software.
- Identify the features of System Monitor.
- Identify the features of System Watch.
- Identify Precise Vision panel and version compatibility.
- Import addressable device configurations from C-Linx.
- Troubleshoot common configuration issues.
Course Requirements
A personal computer and active myFike account with Internet access is required to enroll. Additionally, you will need the following:
- Laptop with at least 1 USB port
- USB to DB9 programming cable (Part # 10-1374B or equivalent)
Register Now >>
leopardo® XI Certification
In this 3-day course, you will learn how to design, install, and maintain the Cheetah Xi and Cheetah Xi 50 Intelligent Fire Suppression Control System.
Course Overview
In this 3-day course, you will learn how to design, configure, install and maintain a Cheetah Xi Addressable Fire Suppression Control System. This course is separated into three sections; Precourse, Live Course, and Exam. The Precourse work should be completed PRIOR to attending the Live Course session.
Upon successfully completing this course, you will be able to:
- Identify the features and functions of the Cheetah Xi Addressable Fire Suppression Control System.
- Identify hardware and wiring locations and types.
- Identify the device LED multicolor active/alarm states.
- Configure addressable devices using C-Linx or the Control Panel.
- Troubleshoot a ground fault on the panel.
- Retrieve event history and sensitivity reports from the panel.
Register Now >>
CyberCat® Certification
In this 3-day course, you will learn how to design, install, and maintain the CyberCat Control Intelligent Control System.
Course Overview
In this 3-day course, you will learn how to design, configure, install and maintain a CyberCat® Fire Alarm and Communications System.
Upon successfully completing this course, you will be able to:
- Identify the features and functions of the CyberCat Fire Alarm and Communications System.
- Identify hardware and wiring locations and types.
- Identify the device LED multicolor active/alarm states.
- Configure addressable devices using C-Linx or the Control Panel.
- Troubleshoot a ground fault on the panel.
- Retrieve event history and sensitivity reports from the panel.
Register Now >>
Cheetah Xi and CyberCat Course Requirements
A personal computer and active training.Fike account with Internet access is required to enroll. Additionally, you will need the following:
Laptop with at least 1 USB port
USB to DB9 programming cable (Part # 10-1874B or equivalent)
Personal Development Hours
leopardo® Xi, CyberCat 3 day courses offer 21 Professional Development Hours (PDHs). Precise Graphics 8-hour course offers 8 Professional Development Hours (PDHs).
Event Date:
-
Event Location:
Fike Corporation Headquarters: Blue Springs, MO