SRL Reverse Acting Rupture Disc
SRL Reverse Acting Rupture Disc
  • SRL* Good in Liquid Applications Perimeter Scored
  • SRL* Good in Liquid Applications Perimeter Scored

SRL Reverse Acting Rupture Disc

Scored, Reverse-Acting, Low Burst Pressure

This convenient one-piece, single membrane rupture disc is reverse-bulged and perimeter-scored to facilitate opening without knife blades.

Request a Quote

  • Operates in both gas and liquid applications
  • Effective in the isolation of Safety Relief valves
  • Withstands full vacuum, without the aid of a vacuum support
  • Will sustain cyclic and pulsating pressures as high as 90% of the stamped disc rating or 95% of minimum burst pressure
  • If damaged during normal installation, the SRL rupture disc will open at less than 1.5 times the stamped burst pressure
  • Special seating configuration allows SRL discs to perform reliably, even under less-than-ideal bolt loading conditions
  • Effective in VALVEGUARD protection of expensive Pressure Relief Valves and Safety Relief Valves

 

Design Scored, Reverse-acting, Low Burst Pressure
Size Range 1 in to 8 in DN25 to DN200
Burst Pressure Range 10 psig to 275 psig 0.69 barg to 18.97 barg
Burst Pressure Tolerances ± 2 psig for burst pressures ≤ 40 psig
± 5% for burst pressures > 40 psig		 ± 0.15 barg for burst pressure ≤ 1.50 barg
stand. ± 10% / red. ± 0.15 barg for burst pressure > 1.50 barg and < 2.76 barg
stand. ± 10% / red. ± 5% for burst pressures ≥ 2.76 barg
Materials 316/316L SST, Nickel 200/201, Monel® 400, Inconel® 600, Hastelloy® C276 and Tantalum

 

 

Pressure Relief Installation & Maintenance Videos

 

Data Sheets & Brochures

 

Related Products